FEATURES

• Engineered safety: the lid and corners of the table top are covered with insulation to avoid burn injuries;
• Exclusive patented locking device ‘with eight evenly distributed columns’ is safer and more productive;
• Locking device: more reliable than ordinary locking devices;
• Lid closing check: the machine cannot start if the lid does not close properly, by checking mechanically and electrically;
• Real-time monitoring: the system will monitor the lid locking, pressure and temperature status in real time to ensure the safe and successful operation of the autoclave;
• Cooling lock opening temperature: each programme can set a different lid opening temperature, especially for liquid programme, so that the user will not open the lid and get burnt when the products are still at high temperature;
• Triple protection against lack of water: the bottom of the amber sterilisation chamber is equipped with three different drying zones. combustion protection devices: type of liquid expansion, type of copper temperature sensor and type of electrical I/O (water level sensor) to avoid misjudgement caused by one method;
• Double overpressure protection;
• Mechanical pressure gauge and electric sensor system, as soon as the pressure becomes abnormal, the system will cut off the power, release the pressure and sound an alarm;
• Automatic Troubleshooting: the system will monitor the working condition and cut off the power, send alarm and report error information when any abnormal situation is detected;
• Equipped with highly sensitive electrical protection system, effectively providing leakage, overcurrent and short-circuit protection.

 

Main technical specifications
Model	Standard GR60DA
	With automatic drying function GR60DR
Capacity (L)	60
Dimensions (L*W*H)(mm)	DA:644x660x980
	DR:644x831x980
Camera Size (Dia*H)(mm)	φ390×505
Rated power (W)	2900
SUS 304 Basket (Dia*H)(mm)(Note 1)	(φ370×190) ×2
Power consumption	220V+10% 16A 501IZ/60HZ
Temperature display accuracy	0.1℃
Working environment	Working environment 5℃~40℃ with relative humidity < 85%
Camera Material	SUS304 stainless steel
Sterilization temperature range	105℃~138℃
Sterilization time range	1~6000 min (user-set, other mode can be set up to 480 min)
Heating temperature	45℃~79℃
Warm-up time	1~9999 min
Drying (DR only)	Drying time: 1~300 min Drying temperature: 80~160℃
Temperature range of the cooling lock opening	40℃~99℃ for solids, waste, agar, self-separating40℃~80℃ (примечание 2) для жидких
Sterilization mode	Liquid, liquid with a warming solid, wrapped tool, cloth, rubber, instant, waste-free, self-defining
Number of saved programs	DA: 20 programs DR: 60 programs
Exhaust speed control	Fully automatic internal unloading with a choice of 6 levels
The method of opening the lid	Reclines (up and down)
Water tank	DA water tank: 2 water tanks for steam collection DR: 1 water tank for steam collection + 1 water storage tank
Reception time range	(Auto-start recording) 0~15 days
Pressure measuring range	-0.1~0.5 MPa
Set pressure in the pressure valve	0.29 Mpa
The controller	Intelligent microcomputer controller "Inspiration"
Safety device	"Eight evenly distributed columns” locking device, electric double internal lock, lid closure check, dry burn protection, safety valve, water level sensor, overheating/pressure protection, temperature/pressure monitor, electrical protection (overcurrent/short circuit/leakage), cooling lock, lid against burns, automatic troubleshooting
Biosafety function	Option for a 0.2 microns thick bioprotective filter (basic model + S)
Note 2: The OPENING temperature of the cooling lock. refers to the local boiling point